ADS Security > Landing Pages > Promotions > Self-Help > Change Door/Window Contact Batteries

Learn to Change the Batteries in Your Door Contacts

    Before attempting to replace the batteries in any sensor, call our customer service station and place your system on test. This will prevent any accidental dispatch of the police.


    Please select your motion detector below.




    Honeywell 5815




    Honeywell 5816




    Lyric SIXCT




    DMP 1100 Series




    DMP 1106

    Displays as right column content on 2 column template. If you want this column to display above column 1 on mobile, select the "Column 2 On Top" option in the edit dialog.

    Honeywell 5815

      1. Find small slot on one end.

       

      2. Insert small screwdriver into slot

       

      3. Twist until cover pops open.

        4. Remove the battery from its slot.

         

        5. Place new battery in its slot, making sure to match the positive and negative signs on the battery and sensor

          6. Align the seam opposite the indent at an angle.

            7. Lever the case to the backing until it clicks shut.

            Honeywell 5816

              1. Locate latch tab on one end.

               

              2. Insert coin.

               

              3. Gently press down with coin until cover pops open.

                4. Remove the battery from its slot.

                 

                5. Place new battery in its slot, making sure to match the positive and negative signs on the battery and sensor.

                  6. Align the seam opposite the indent at an angle.

                    7. Lever the case to the backing until it clicks shut.

                    Lyric SIXCT

                      1. Slide front-plate to one end of the sensor.


                      2. Pull front-plate away from sensor.

                        3. Remove the battery from its slot.

                         

                        4. Place new battery in its slot, making sure to match the positive and negative signs on the battery and sensor.

                          6. Align the case to the backing a little off-center, as it was when you detached it.

                            6. Slide casing into place until it softly clicks into place.

                            DMP 1100 Series

                              1. Locate button at one end of the sensor.

                               

                              2. Press button until case pops away from backing.

                               

                              3. Pull away and down to remove casing.

                                4. Remove the battery from its slot.

                                 

                                5. Place new battery in its slot, making sure to match the positive and negative signs on the battery and sensor.

                                  6. Align the seam opposite the button at an angle.

                                    7. Lever the case to the backing until it clicks shut.

                                    DMP 1106

                                      1. Insert a  thumbnail into the slot on the narrow side.

                                       

                                      2. Squeeze device gently but firmly to pry open.

                                       

                                      3. Pull front plate towards the narrow end to remove cover.

                                        4. Remove the battery from its slot.

                                        5. Place new battery in its slot, making sure to match the positive and negative signs on the battery and sensor.

                                          6. Align the seam opposite the indent at an angle.

                                            7. Lever the case to the backing until it clicks shut.

                                            Linked In Code

                                            Share this